Hardware for the CAD Professional, Part 1: Requirements
At Cadalyst we often hear questions regarding the hardware end of the equation, particularly about the system requirements to do useful work with the AutoCAD family of products. As a result, I’m starting this series of blog posts on hardware for the CAD professional, with each segment focusing on a specific area such as graphic cards, memory and hard disks.
Base Requirements Are the Starting Point
Users often have a look at the base requirements for their planned design software and plan their system purchase accordingly. For the most part, vendors such as Autodesk provide requirements based on what is considered workable speeds, not what gives the absolute best performance overall. This information makes a good starting point for configuring your workstation, but shouldn’t be thought of as the “perfect” system requirements. These days Autodesk is providing both the requirements for just running AutoCAD, along with an additional set of higher specifications required for systems creating 3D work.
Requirements for 3D Modeling
The additional requirements for 3D modeling (all configurations, 32-bit and 64-bit) include faster and more capable processors, 2GB RAM or more, 2GB of available hard disk space in addition to free space required for installation, and a graphics display adapter capable of at least 1,280 x 1,024 resolution in true color. The graphics card needs to have 128MB or more memory, support for Pixel Shader 3.0 or greater, and Microsoft Direct3D capabilities. On looking at even these more advanced requirements, they seem to be still targeting the minimum rather than the truly useful range.
Best Performance for Your Dollars
My plan is to go through the system component choices you’ll be faced with if you configure a workstation online — what will give you the best performance for your dollars. With technological innovations and higher capacity hardware, this presents a constantly changing target. We all too often receive emails from users who “bought a system that meets the specifications provided” but is still too slow for the kind of work they are doing. All too often the impact of a given system component can negatively impact overall performance. At the same time, it’s possible to make some tweaks to well-performing systems to enhance their capabilities even more.
Author: Ron LaFon
Leave a Reply Cancel reply
This blog was developed by Longitude Media, publisher of Cadalyst.
- May 2013
- April 2013
- March 2013
- January 2013
- December 2012
- November 2012
- October 2012
- September 2012
- August 2012
- July 2012
- June 2012
- May 2012
- April 2012
- March 2012
- February 2012
- January 2012
- December 2011
- November 2011
- October 2011
- September 2011
- August 2011
- July 2011
- June 2011
- May 2011
- April 2011
- March 2011
- RT @cadtoolbox: New from @SolidSmack botObjects Taunts with ProDesk3D Prints, Pricing and Promises. Questions Linger. http://t.co/EtkgXuhKy…Tweeted 1 hour ago
- RT @3dprinting3d: At the #XBox One launch event @Microsoft revealed how they use 3Dprinting in their product design cycle. http://t.co/ZGe…Tweeted 1 hour ago
- RT @autodesk: Learn how @AutoCAD 2014 leverages the power of the #cloud, #social & #mobile computing autode.sk/197NvHf @Desktop_EngTweeted 2 hours ago
- RT @MGITweets: #What's new in #Autodesk #Inventor #2014? We're glad you asked, check it out: - ow.ly/lcmniTweeted 2 hours ago
- #CAD_mgrs! Clean Machines More Quickly with System Mechanic hub.am/11cSRyZTweeted 5 hours ago
The Latest from CADspeed:
- Free Webinar: Improve Civil, BIM & Plant Workflows with 3D Laser Scanning Hardware
- Solid State Drives for CAD Workstations
- Free CAD Workstation Resource Guide Available for Download
- Do You Really Need ECC Memory for CAD Workstation Computing?
- Protect Sensitive Data With Easy, Secure Data Image Overwrite for Your Large Format Devices