Archive

Posts Tagged ‘RAM’

Speed Up Civil 3D with a 64-bit Operating System, Part 3: Selling to the Boss

September 8, 2011 1 comment

Windows 7 64-bit Operating System for Civil 3DSo far, we’ve covered the advantages of upgrading a 64-bit operating system for Civil 3D and other CAD applications as well as the benefits in non-CAD tasks also.

All of these benefits are driving the PC market to embrace 64-bit operating systems like never before. Last year the Windows Blog reported the installed was approaching 50% and NPD recently reported that over 75% of computer systems on retail shelves were being sold with some flavor of Windows 7 64-bit pre-installed. All of this makes it clear that the 32-bit OS is a thing of the past and prime for extinction soon.

The best way to future-proof that Civil 3D workstation for tomorrow is to recognize this trend and migrate to 64-bit today!

Benefits versus Costs

Since almost any new CAD system you order from a big manufacturer will come preloaded with Windows 7 64-bit, the real decision lies in updating your old systems. Costs for licenses will vary depending on your software source and your licensing relationship with Microsoft. But it is safe to assume that the change will cost a few hundred dollars to install Windows 7 64-bit on each machine.

While that may seem like a hard pill to swallow consider this: Assume a man year is over 2000 hours. Billing at an average rate of $60/hour, if your employees could improve renderings, processing, and files open/save procedures to save just one minute per hour that would equate to $2000 of billable time a year! That means your 64-bit investment would pay for itself in a single year! Now those are numbers worth taking to the boss.

If after all of this you are still set on keeping your old, tired 32-bit system, we understand. Change is scary. Drop us an email and let us know how things are back in the 1990s. You can address it to “the future of Civil 3D.” We’d love to hear from you.

Author: Curt Moreno

Speed Up Civil 3D with a 64-bit Operating System, Part 2: Non-CAD Tasks

September 7, 2011 2 comments

Windows 7 64-bit Operating System for Civil 3DWe’ve been discussing Civil 3D and other CAD applications up to this point. But the average CAD workstation has to do so much more than CAD. Well if you are running a 64-bit operating system you are going to see benefits in these non-CAD tasks also.

Thanks to the aforementioned improvements in memory and computational management, even the most boring tasks will be improved. For instance Microsoft Office Excel will be able to open massive workbook faster and easier since it no longer has to break the data into “manageable” 2GB chunks. Microsoft Project will handle huge projects with greater ease and fewer stalls/crashes when multiple sub-projects are involved. Adobe Photoshop will render and perform file open/save functions much faster. And that is just to name a few of the great things that 64-bit operating systems can do.

But if CAD is really all you are concerned with then here is the best news of all. Many modern CAD applications are available in native 64-bit versions. These newly improved releases sport better reliability, data management, and memory utilization. What does that all mean? It means you will be rocking you CAD drawings at maximum velocity!

Next, we’ll sell it to your boss.

Author: Curt Moreno

Speed Up Civil 3D with a 64-bit Operating System, Part 1: The Benefits

September 1, 2011 6 comments

Windows 7 64-bit Operating System for Civil 3DI am going to make this THE shortest and easiest tech blog post you’ve ever read: Go install Windows 7 64-bit on your Civil 3D workstation. Now!

The end.

Like the idea, but need a bit more information? Good. No one likes a sheep unless you need a sweater or are making kabobs. Let’s look at some reasons why Win7 64-bit is the way to go if you are doing some serious Civil 3D work.

Value

We can separate the big boys from the posers with one question: Do you want to get as much value as possible from your workstation investment? If the answer is yes, then you have to take a serious look at Win7 64-bit. Civil 3D workstations are capable of some amazing things with new releases of software becoming more and more powerful. But if you want those point clouds and massive topo surfaces to render as quickly as possible, you need to give your workstation room to work. That means bringing as much RAM to the table as possible.

Old-fashioned 32-bit systems (even Win7 32-bit) have a measly 4GB maximum of possible RAM and only a little of 3GB of that will be available to Civil 3D! This creates a processing bottleneck that will slow down your system and make you wonder why you even upgraded your Civil 3D. Modern 64-bit systems operate with a MINIMUM 4GB requirement and go upwards of 128GB and more, depending on your OS choice! The processing difference between 4GB on 32-bit and, say, 16GB on 64-bit is like night and day. This will give you more value from the same hardware investment.

Heavy Lifting

Each new release of Civil 3D and most CAD applications bring new and improved capabilities. From grater surface detail to larger and larger point clouds, all of these features are welcome with open arms by users. But these great new features also bring more processing overhead to CAD workstations that may already struggling. Older systems running 32-bit operating systems will show their age as these new features require greater amounts of memory, faster processing and longer rendering times.

By contrast, CAD workstations sporting modern 64-bit operating systems are ready for these challenges. As mentioned before, a 64-bit operating systems is nearly limitless in the amount of RAM it can apply to complicated tasks. But in addition to raw RAM, a 64-bit operating system using RAM more efficiently in its memory allocation and computational processing. This means that meg for meg, a 64-bit workstation manages its processor and RAM more efficiently than its older 32-bit counterpart!

Wait, there’s more. Upgrading to a 64-bit operating system affects your non-CAD tasks as well. We’ll talk about that topic next time!

Author: Curt Moreno

Cadalyst Systems Benchmark, Part 3: The Compare Option

August 30, 2011 2 comments

Previously, we discussed the meaning behind the various index scores reported by the Cadalyst Systems Benchmark. Next, we talked about operating the benchmark. In this, part 3 of our blog, we finish discussing the operation of the Cadalyst Systems Benchmark.

Compare Option

The final choice of the benchmark’s initial dialog box enables the compare option, which lets you save and compare times for different test runs. This is a powerful tool that we added to C2008 v5.1 to help us develop new tests for the benchmark itself. You can use it to easily see the effects (if any) for alternate configurations of your workstation. This option is disabled by default.

Compare Option

Compare Option

Compare Options Menu

You have six choices here. The first three concern the operation of the compare function: Save Current Test Times for Later Comparison, then EXIT; Compare Current Test Times to Previous Test Times; and Save Current Test Times and Compare to Previous Test Times.

Compare Options Menu

Compare Options Menu

The compare function lets you compare the times from two different test runs, creating a new set of relative index numbers. It calculates the index numbers based on the ratio of the test times from the first selected file compared to the test times of the second selected file. If nothing has changed and the two different test times are virtually identical, the new calculated index is approximately 1.00. Where something has changed, the new index number clearly shows the relative improvement. For example, an index number of 1.50 indicates that performance has improved by 50%. This is a handy method for directly quantifying the benefits of, say, using a RAID 0 configuration for your hard drives.

The fourth choice, Just Exit C2012, simply aborts the compare option. The last two choices deal with help dialog boxes: Enable Informational Alert Boxes and Disable Informational Alert Boxes—the default setting.

Informational Alert Boxes

If enabled, informational alert dialog boxes popup (using AutoLISP’s alert message function) to provide contextual help when saving and comparing different test results. These dialogs, one for each of the three compare options, guide you through the process of using the compare function until you are ready to disable them.

Save and Compare Inforrmational Alert Box

Save and Compare Inforrmational Alert Box

One More Option

There is a hidden option (disabled by default) that appends the actual times for each individual test, in seconds, to the end of the C2012_data.dta file. To enable this option, you must edit the C2012_indx.lsp file. You can edit this text file using Windows’ WordPad utility. To enable the option, just remove the two semicolons at the beginning of the line located near the end of the file, which reads: ;;(load “times”).

(Note: The AutoLISP interpreter ignores any code on a line after a semicolon.)

Enable Hidden Option with text

Enable Hidden Option with Text

This wraps up our blog on the Cadalyst Systems Benchmark. We hope it helps you to evaluate and compare the performance of different workstations running AutoCAD.

Author: Art Liddle

Cadalyst Systems Benchmark, Part 2: Download, Installation and Operation

August 25, 2011 2 comments

Previously, we discussed the meaning behind the various index scores reported by the Cadalyst Systems Benchmark. Here, we will talk about operating the benchmark. For our discussion, we will use the latest version of the Cadalyst Systems Benchmark, C2012 v5.4, which was recently released.

The Readme_C2012.txt file (included in the Zip file available for download) gives instructions for installing the Cadalyst Systems Benchmark. They are straightforward, so we will not repeat them here.

The initial dialog box for the C2012 benchmark offers several radio-button options for customizing the test, as well as edit boxes for recording selected information about your workstation configuration. We will discuss each item in order, working our way down from the top of the dialog box.

Record Current System Configuration

This collection of six edit boxes prompts you for key information about your system’s configuration. We strongly suggest that you take full advantage of this section; record as much data as you can at the time of the test—up to a maximum of 132 characters per edit box. This information will make your life easier when you are pouring over the test data later. The benchmark stores your responses in the C2012_data.dta file, using them as defaults the next time you run the test. (If it hasn’t changed, you don’t need to retype information for each test.) The last edit box (Remarks) lets you record general notes to yourself. The benchmark automatically determines and records the following information: AutoCAD version, graphics window size in pixels, and the current date and time.

Record Current System Configuration

Record Current System Configuration

Test Functions

This is where you choose which type of test to run: 3D/2D/Other Functions (the only option that includes the Total Index score), 2D/Other Functions, or 3D Functions Only. Depending upon the type of work you do with AutoCAD, you can save yourself a lot of time by choosing either of the latter two options. In addition, if you do not have at least a midrange 3D graphics card, skip the 3D test—it can take several hours to run with a low-end card.

Test Functions

Test Functions

Number of Test Loops

For our reviews, we typically choose to run three loops of the test; the benchmark automatically calculates and reports average scores and times. For the record, we have found that the scores from a single run of the test closely match the average scores from three iterations. New to the C2012 version: We added a Battery Rundown Test option, which runs 99 loops. As the name indicates, we use this option for measuring the battery performance of mobile workstations.

Number of Test Loops

Number of Test Loops

Next time, in part 3 of our series, we will discuss the Compare Option. Originally added to the Cadalyst Systems Benchmark strictly for our internal use, it proved to be so handy, we enabled it for everyone.

Author: Art Liddle

Find the Optimal Hardware Configuration for ArchiCAD

August 23, 2011 5 comments

One of the most common questions our tech staff gets from customers is “What is the best hardware config for ArchiCAD?” It’s easy to go overboard and buy the most expensive of everything, but many times less expensive components are almost just as good. The “optimal” configuration is almost as fast as the “best” configuration, with a more attractive price tag.

Let’s review the priorities:

CPU

The processor is still the most important component of your config. Since ArchiCAD supports multiprocessing, we recommend 4-core processors. 6 and 8 cores are significantly more expensive while providing little benefit, so 4-core is the most optimal choice. Pick something from the middle range — prices rise exponentially with performance.

RAM

ArchiCAD supports 64-bit. To see the benefits of this, you need at least 8GB of physical RAM. While most of the times ArchiCAD will use significantly less than this, since RAM is now cheap there is really no reason to economize here. There are times when you will run multiple copies of ArchiCAD or run other applications simultaneously.

Hard Drives

ArchiCAD stores cached data while it operates, so there is a lot of file I/O going on while working in ArchiCAD — not just when saving files. Therefore hard drives are a key — and often overlooked — speed factor. With the price of solid state drives coming down considerably in the past year, they might be a sensible investment. You don’t need a huge SSD. You are better off with a smaller (say 128GB) SSD combined with a large conventional hard drive. You will install the system and ArchiCAD on the SSD, but you will store files on the conventional drive.

Video Cards

ArchiCAD uses hardware acceleration in both 2D and 3D. That said, while the importance of hard drives is often underrated, video cards are often overrated. In general we can say that it is more important to have a recent video card than a particularly high-end video card. It’s not a bad practice to replace the video card at the half of your computer’s lifespan.

When you buy a new card, it’s important to have enough video RAM. We currently recommend 1GB. Drivers are key for optimal performance. If you want to have a peace of mind about drivers, you might consider going with a “professional series” video card — at a much heftier price. You can find a list of recommended cards in our knowledge base.

Monitors

Screen real estate is a huge productivity factor. Here we have only one recommendation: The bigger the better. You can also hook up two monitors, if your video card supports that.

Author: Gergely (Greg) Kmethy, Team Leader, Technical Support, Graphisoft

Cadalyst Systems Benchmark, Part 1: Evaluate and Compare Workstations Running AutoCAD

August 16, 2011 3 comments

Merriam-Webster’s online dictionary lists one definition for benchmark as: a standardized problem or test that serves as a basis for evaluation or comparison.

The Cadalyst Systems Benchmark is designed to help you evaluate and compare the performance of workstations running AutoCAD. Comparing the performance scores between workstations (or different configurations) will help you make intelligent choices when purchasing a new computer or upgrading an existing one.

The Cadalyst Systems Benchmark reports a total index score and four component index scores keyed to specific performance areas, as well as individual numbers for each subroutine of the test. Note: the index numbers are simply a ratio of the base time for an operation compared to the current test time for an operation. Larger index numbers indicate better performance.

Total Index: This is an average of the four component indexes: It gives a quick look at the overall performance for a workstation. The Total Index score is the number we focus on for our reviews, but you can dig a little deeper for additional performance information relevant to your specific requirements.

3D Graphics Index: This is closely tied to a workstation’s graphics card. Depending on the rendering mode you typically use when working with 3D models in AutoCAD, you may want to focus on just one of the 3D graphics subcategories: Wireframe, Hidden, Conceptual, and Realistic. If you don’t work with 3D models, you can safely ignore this index all together.

2D Graphics Index: This measures more than just 2D graphics performance: It effectively measures all onscreen performance that does not involve rendering a 3D model. This component of the test creates, copies, blocks, moves, arrays, changes layers, changes colors, explodes, and erases three different types of objects: orthogonal lines, radial polylines, and text. Zoom and Pan commands are sprinkled throughout each test. Don’t pay any attention to the individual subcategories for this one, what matters is the total score.

Disk Index: This measures a workstation’s performance for reading and writing files to the hard drive. Most of the drives on the market today provide similar performance. What will make a big difference is having a pair of drives in a RAID 0 configuration. For RAID 0, file operations are simultaneously split between the two drives, nearly doubling performance.

CPU Index: This gauges the performance of the central processing unit at the heart of each workstation. It has proven to be an accurate measure of relative performance, especially with the turbo-mode of the new generation CPUs.

Cadalyst Systems Benchmark Results Page

Cadalyst Systems Benchmark Results Page

Next time, we’ll discuss the operation of the Cadalyst Systems Benchmark in some detail.

Author: Art Liddle

TwitterChat Archive: SolidWorks Optimization with Josh Mings, SolidSmack

August 1, 2011 Leave a comment

SolidWorks Optimization with Josh Mings

by cadalyst_mag

Dell- and Cadalyst-Sponsored TwitterChat abput optimizing your system for SolidWorks.
RT @DellEnterprise: Live #CAD chat! Join Dell, @Cadalyst_Mag, & @SolidSmack at #DellCAD, Thursday 4pm East. Info- http://del.ly/6019Rzi5

Robinson11976


img

July 28, 2011

Robinson11976 imgimg
RT @Cadalyst_Mag: Using #SolidWorks? Join our @SolidSmack TwitterChat today 3pm CST #dellcad http://t.co/3juQzy1

SolidSmack


img

July 28, 2011

SolidSmack imgimg
RT @SolidSmack: RT @Cadalyst_Mag: Using #SolidWorks? Join our @SolidSmack TwitterChat today 3pm CST #dellcad http://t.co/3juQzy1

bcbenton


img

July 28, 2011

bcbenton imgimg
Do you use SolidWorks? Join our chat with @SolidSmack & @Cadalyst_Mag that starts –in just 3 hours– using #DellCAD http://del.ly/6012RzUe

DellSMBnews


img

July 28, 2011

DellSMBnews imgimg
RT @DellSMBnews: Do you use SolidWorks? Join our chat with @SolidSmack & @Cadalyst_Mag that starts –in just 3 hours– using #DellCAD http://del.ly/6012RzUe

DanitaBlackwood


img

July 28, 2011

DanitaBlackwood imgimg
RT @DellSMBnews: Join us, @SolidSmack and @Cadalyst_Mag TODAY at 3pm Central for a TwitterChat on #SolidWorks. Hastag = #DellCAD http://del.ly/6012Rzmu

LaurenatDell


img

July 28, 2011

LaurenatDell imgimg
RT @DellSMBnews: Join us, @SolidSmack and @Cadalyst_Mag TODAY at 3pm Central for a TwitterChat on #SolidWorks. Hastag = #DellCAD http://del.ly/6012Rzmu

LPT


img

July 28, 2011

LPT imgimg
RT: Do you use SolidWorks? Join our chat with @SolidSmack & @Cadalyst_Mag that starts –in just 3 hours– using #DellCAD http://t.co/vY2U7gd

DellChannel


img

July 28, 2011

DellChannel imgimg
RT @DellSMBnews: Join us, @SolidSmack and @Cadalyst_Mag TODAY at 3pm Central for a TwitterChat on #SolidWorks. Hastag = #DellCAD http://del.ly/6012Rzmu

DellSmbUS


img

July 28, 2011

DellSmbUS imgimg
#DellCAD TwitterChat in 1 hour with @SolidSmack: Performance optimization with #SolidWorks. http://t.co/3juQzy1

Cadalyst_Mag


img

July 28, 2011

Cadalyst_Mag imgimg
30 min until our tweetchat w/ @SolidSmack & @Cadalyst_Mag to talk SolidWorks performance & workstations. #DellCAD http://del.ly/6011RzSt

DellSMBnews


img

July 28, 2011

DellSMBnews imgimg
RT @DellSMBnews: 30 min until our tweetchat w/ @SolidSmack & @Cadalyst_Mag to talk SolidWorks performance & workstations. #DellCAD http://del.ly/6011RzSt

digitalworldsam


img

July 28, 2011

digitalworldsam imgimg
20 minutes till @joshmings fills your tweet stream with sweet #SolidWorks Performance Q&A. Grab a ham and follow #DellCAD @Cadalyst_Mag

SolidSmack


img

July 28, 2011

SolidSmack imgimg
Live Twitter chat on CAD starting now! See #DellCAD to join in the conversation.

DellEnterprise


img

July 28, 2011

DellEnterprise imgimg
#DellCAD TweetChat in 5 min with @SolidSmack. Grab a cup of coffee and let’s talk #SolidWorks. http://t.co/3juQzy1

Cadalyst_Mag


img

July 28, 2011

Cadalyst_Mag imgimg
Twitter chat with @solidsmack starting in 4 minutes. Shantanu Kedar from the SolidWorks Partner Team will be helping out on our end #DellCAD

SolidWorks


img

July 28, 2011

SolidWorks imgimg
getting ready to hang with @joshmings to chat about SolidWorks performance and workstations – join #DellCAD (I’ll be there as @DellSMBnews)

LPT


img

July 28, 2011

LPT imgimg
RT: @DellEnterprise Live Twitter chat on CAD starting now! See #DellCAD to join in the conversation.

DellChannel


img

July 28, 2011

DellChannel imgimg
Welcome to the #DellCAD TwitterChat with @SolidSmack. We’re talking about #SolidWorks optimization right now.

Cadalyst_Mag


img

July 28, 2011

Cadalyst_Mag imgimg
I’m Michelle with @Cadalyst_Mag. Please use #DellCAD to follow along as we chat with Josh Mings of @SolidSmack about #SolidWorks.

Cadalyst_Mag


img

July 28, 2011

Cadalyst_Mag imgimg
One of Cadalyst’s favorite bloggers, Josh Mings @SolidSmack is ready for your questions. Use #DellCAD to ask a ?.

Cadalyst_Mag


img

July 28, 2011

Cadalyst_Mag imgimg
We’re excited to be partnering with @CADalyst_Mag and @SolidSmack today to talk workstations and SolidWorks performance at #DellCAD!

DellSMBnews


img

July 28, 2011

DellSMBnews imgimg
Want to optimize the gravy bits out of #SolidWorks on your workstation? Tell us your story at #DellCAD right about… now.

SolidSmack


img

July 28, 2011

SolidSmack imgimg
Please introduce yourself at any time in the conversation by using the #DellCAD hashtag.

Cadalyst_Mag


img

July 28, 2011

Cadalyst_Mag imgimg
#DellCAD tweetchat starting now. Join the discussion about optimizing your workstation performance for #SolidWorks

LaurenatDell


img

July 28, 2011

LaurenatDell imgimg
Remember to use #DellCAD in your tweets to join in the conversation about optimizing #SolidWorks.

Cadalyst_Mag


img

July 28, 2011

Cadalyst_Mag imgimg
My favorite way to optimize SolidWorks? Smart modeling practice – minimize external ref, reduce relations, complex features last #DellCAD

SolidSmack


img

July 28, 2011

SolidSmack imgimg
checking out #DellCAD looking forward to what Josh has to say
John

waldenweb


img

July 28, 2011

waldenweb imgimg
RT @Cadalyst_Mag: I’m Michelle with @Cadalyst_Mag. Please use #DellCAD to follow along as we chat with Josh Mings of @SolidSmack about #SolidWorks.

bcbenton


img

July 28, 2011

bcbenton imgimg
RT @LaurenatDell: #DellCAD tweetchat starting now. Join the discussion about optimizing your workstation performance for #SolidWorks

bcbenton


img

July 28, 2011

bcbenton imgimg
@waldenweb nice to see ya John. How’s the SolidWorks performance these days? #DellCAD

SolidSmack


img

July 28, 2011

SolidSmack imgimg
Jumping into TwitterChat now w/ @SolidSmack #DellCAD – I’m mostly a PDM/PLM guy, but Josh is 2 cool to miss and I’ve been a SWX fan for yrs

jonathanpscott


img

July 28, 2011

jonathanpscott imgimg
#SolidWorks optimization on the hardware side? Maximize CPU speed. You’ll be glad you did. #DellCAD

SolidSmack


img

July 28, 2011

SolidSmack imgimg
RT @jonathanpscott: Jumping into TwitterChat now w/ @SolidSmack #DellCAD – I’m mostly a PDM/PLM guy, but Josh is 2 cool to miss and I’ve been a SWX fan for yrs

DellSMBnews


img

July 28, 2011

DellSMBnews imgimg
RT @LaurenatDell: #DellCAD tweetchat starting now. Join the discussion about optimizing your workstation performance for #SolidWorks

CamilleATX


img

July 28, 2011

CamilleATX imgimg
How do you optimize file colaboration with Solidworks? #DellCAD

bcbenton


img

July 28, 2011

bcbenton imgimg
RT @SolidSmack: #SolidWorks optimization on the hardware side? Maximize CPU speed. You’ll be glad you did. #DellCAD

DellSMBnews


img

July 28, 2011

DellSMBnews imgimg
#DellCAD: Josh, we’ve got a reader who needs to upgrade to run the latest #SolidWorks. What do you recommend?

Cadalyst_Mag


img

July 28, 2011

Cadalyst_Mag imgimg
RT @LPT: getting ready to hang with @joshmings to chat about SolidWorks performance and workstations – join #DellCAD

JohnEvansDesign


img

July 28, 2011

JohnEvansDesign imgimg
Running SW2010 on Windows 7 64bit with 8G Ram, working pretty well #DellCAD

waldenweb


img

July 28, 2011

waldenweb imgimg
If upgrading to SolidWorks 2011, go Windows 7 64bit, 6GB RAM minimum (It’s cheap!), 1GB graphics card is nice too. @Cadalyst_Mag #DellCAD

SolidSmack


img

July 28, 2011

SolidSmack imgimg
Ooh, question about #SolidWorks file collaboration optimization on #DellCAD – now you’ve got my full attention!

jonathanpscott


img

July 28, 2011

jonathanpscott imgimg
RT @Cadalyst_Mag: #DellCAD: Josh, we’ve got a reader who needs to upgrade to run the latest #SolidWorks. What do you recommend?

DellSMBnews


img

July 28, 2011

DellSMBnews imgimg
RT @johnevansdesign: RT @LPT: getting ready to hang with @joshmings to chat about SolidWorks performance and workstations – join #DellCAD

bcbenton


img

July 28, 2011

bcbenton imgimg
RT @Cadalyst_Mag: One of Cadalyst’s favorite bloggers, Josh Mings @SolidSmack is ready for your questions. Use #DellCAD to ask a ?.

olegshilovitsky


img

July 28, 2011

olegshilovitsky imgimg
@waldenweb – 8GB of RAM — worth it, you think? I believe the more RAM, the better. #DellCAD

Cadalyst_Mag


img

July 28, 2011

Cadalyst_Mag imgimg
@bcbenton file collaboration: two ways – 1) work off network with established file name convention #DellCAD

SolidSmack


img

July 28, 2011

SolidSmack imgimg
RT @SolidSmack: If upgrading to SolidWorks 2011, go Windows 7 64bit, 6GB RAM minimum (It’s cheap!), 1GB graphics card is nice too. @Cadalyst_Mag #DellCAD

DellSMBnews


img

July 28, 2011

DellSMBnews imgimg
@bcbenton file collaboration (cont) 2) invest in PDM system. sad but true with that. pricey but worth it for med to large company. #DellCAD

SolidSmack


img

July 28, 2011

SolidSmack imgimg
On the @solidsmack tweet stream listening to @joshmings #SolidWorks performance Q&A #dellcad

olegshilovitsky


img

July 28, 2011

olegshilovitsky imgimg
RT @SolidSmack: If upgrading to SolidWorks 2011, go Windows 7 64bit, 6GB RAM minimum (It’s cheap!), 1GB graphics card is nice too. @Cadalyst_Mag #DellCAD

Lanett78


img

July 28, 2011

Lanett78 imgimg
@Cadalyst_Mag – your reader that is upgrading might find our workstation advisor tool helpful, too: http://del.ly/6011RztB #DellCAD

DellSMBnews


img

July 28, 2011

DellSMBnews imgimg
RT @JohnEvansDesign: RT @LPT: getting ready to hang with @joshmings to chat about SolidWorks performance and workstations – join #DellCAD

vzinkus


img

July 28, 2011

vzinkus imgimg
I like answer #2 to @bcbenton question on SWX file collaboration – use PDM if you can afford it. You get collab AND other benefits #DellCAD

jonathanpscott


img

July 28, 2011

jonathanpscott imgimg
Did you know Dell Precision workstations are specifically designed for professionals like those of you who use #SolidWorks? #DellCAD

DellSMBnews


img

July 28, 2011

DellSMBnews imgimg
@Cadalyst_Mag @waldenweb running one rig with 2 Processors and 24GB of RAM…. wooooow, worth it. #DellCAD

SolidSmack


img

July 28, 2011

SolidSmack imgimg
lightweight components and large assembly mode will help with the optimization. #Dellcad

lazytrax


img

July 28, 2011

lazytrax imgimg
@jonathanpscott what are your thoughts on how PDM helps optimize SolidWorks and Workstation? #DellCAD

SolidSmack


img

July 28, 2011

SolidSmack imgimg
I just drooled a little: @SolidSmack @waldenweb running one rig with 2 Processors and 24GB of RAM…. wooooow, worth it. #DellCAD

Cadalyst_Mag


img

July 28, 2011

Cadalyst_Mag imgimg
Questions about CAD hardware configurations? Ask a #Dell expert – @DellRonnie – on #DellCAD

LaurenatDell


img

July 28, 2011

LaurenatDell imgimg
true, and SpeedPacks! @lazytrax: lazytrax: lightweight components and large assembly mode will help with SolidWorks optimization. #Dellcad

SolidSmack


img

July 28, 2011

SolidSmack imgimg
#DellCAD @SolidSmack One big way is thru view/search ability – non-PDM SWX users sometimes load everything into session just to find 1 part

jonathanpscott


img

July 28, 2011

jonathanpscott imgimg
@SolidSmack @bcbenton 1/file share or 2/PDM is pretty much all what available today mainstream for collaboration. #dellcad

olegshilovitsky


img

July 28, 2011

olegshilovitsky imgimg
#DellCAD: We’ve got another reader who is new to #SolidWorks RealView. Any tips on hardware or software optimization?

Cadalyst_Mag


img

July 28, 2011

Cadalyst_Mag imgimg
#DellCAD @SolidSmack Another PDM plus is managing the 3D->2D link. SWX is OK on the 2D->3D direction. But can cost time to find drws from 3D

jonathanpscott


img

July 28, 2011

jonathanpscott imgimg
RT @dellsmbnews: @Cadalyst_Mag your reader that’s upgrading might find our workstation advisor tool helpful http://del.ly/6011RztB #DellCAD

bcbenton


img

July 28, 2011

bcbenton imgimg
RT @LaurenatDell: Questions about CAD hardware configurations? Ask a #Dell expert – @DellRonnie – on #DellCAD

DellSMBnews


img

July 28, 2011

DellSMBnews imgimg
Is anyone using/not using #SolidWorks RealView? Why or why not? #DellCAD

SolidSmack


img

July 28, 2011

SolidSmack imgimg
RT @Cadalyst_Mag: One of Cadalyst’s favorite bloggers, Josh Mings @SolidSmack is ready for your questions. Use #DellCAD to ask a ?.

tonyisme


img

July 28, 2011

tonyisme imgimg
If there are any specific #Dell questions about CAD workstation configurations, let me know! #DellCAD

DellRonnie


img

July 28, 2011

DellRonnie imgimg
unreal RT @Cadalyst_Mag: I just drooled a little: @SolidSmack @waldenweb running one rig with 2 Processors and 24GB of RAM.. #DellCAD

JohnEvansDesign


img

July 28, 2011

JohnEvansDesign imgimg
@Cadalyst_Mag One way to ensure a good RealView experience is to have a professional level graphics card. #DellCAD http://bit.ly/brRb6X

SolidWorks


img

July 28, 2011

SolidWorks imgimg
#DellCAD @bcbenton One more collab tip for SWX is using “multi-user env” options – bad news is it doesn’t always play nice with PDM systems.

jonathanpscott


img

July 28, 2011

jonathanpscott imgimg
A SolidWorks certified GPU will help with RealView. Can view here… some req’ additional file http://bit.ly/oyunZT @Cadalyst_Mag #DellCAD

SolidSmack


img

July 28, 2011

SolidSmack imgimg
@Cadalyst_Mag – speaking of drooling… here’s a fun workstation-related video for motorcycle fans joining #DellCAD http://del.ly/6013Rzt3

DellSMBnews


img

July 28, 2011

DellSMBnews imgimg
Introduce yourself at any time in the conversation by using the #DellCAD hashtag.

Cadalyst_Mag


img

July 28, 2011

Cadalyst_Mag imgimg
#Dellcad RealView feels distracting/unnecessary, not real. Zebra stripes w/surfaces and preview w/PW pretty much removes the need also

tonyisme


img

July 28, 2011

tonyisme imgimg
#Dellcad that should be: preview with PhotoView, PV, not PW

tonyisme


img

July 28, 2011

tonyisme imgimg
RT @bcbenton: RT @dellsmbnews: @Cadalyst_Mag your reader that’s upgrading might find our workstation advisor tool helpful http://del.ly/6011RztB #DellCAD

Kylee_Dell


img

July 28, 2011

Kylee_Dell imgimg
RT @DellSMBnews: @Cadalyst_Mag – speaking of drooling… here’s a fun workstation-related video for motorcycle fans joining #DellCAD http://del.ly/6013Rzt3

Cadalyst_Mag


img

July 28, 2011

Cadalyst_Mag imgimg
@SolidWorks: Graphics cards! Such a hot topic on #CADspeed. Great link: http://t.co/jy0baxR #DellCAD

Cadalyst_Mag


img

July 28, 2011

Cadalyst_Mag imgimg
def for heavy surface modeling! @tonyisme: Zebra stripes w/surfaces and preview w/PW pretty much removes the need for RealView #Dellcad

SolidSmack


img

July 28, 2011

SolidSmack imgimg
RT @DellSMBnews: Did you know Dell Precision workstations are specifically designed for professionals like those of you who use #SolidWorks? #DellCAD

cadesigntek


img

July 28, 2011

cadesigntek imgimg
RT @LaurenatDell: Questions about CAD hardware configurations? Ask a #Dell expert – @DellRonnie – on #DellCAD

cadesigntek


img

July 28, 2011

cadesigntek imgimg
Questions about CAD hardware configurations? Ask a #Dell expert – @DellRonnie – on #DellCAD #dellcad

Kylee_Dell


img

July 28, 2011

Kylee_Dell imgimg
and not to leave F1 fans in #DellCAD out, we’ve also got video of Dell workstations helping Cosworth build engines: http://del.ly/6016Rztu

DellSMBnews


img

July 28, 2011

DellSMBnews imgimg
#DellCAD Anybody using Solid State Drives to help their #SolidWorks performance? Made a huge difference on my laptop!

jonathanpscott


img

July 28, 2011

jonathanpscott imgimg
#DellCAD If you missed Josh’s blog on #CADspeed: Optimize #SolidWorks & be a happier user – http://t.co/BJ1A8MC

Cadalyst_Mag


img

July 28, 2011

Cadalyst_Mag imgimg
RT @SolidSmack: Is anyone using/not using #SolidWorks RealView? Why or why not? #DellCAD

DellSMBnews


img

July 28, 2011

DellSMBnews imgimg
Do you have a dedicated computer just for #SolidWorks? or do you run everything on one? #DellCAD

SolidSmack


img

July 28, 2011

SolidSmack imgimg
Another hot topic – opinions? @jonathanpscott: #DellCAD Anybody using Solid State Drives to help their #SolidWorks performance?

Cadalyst_Mag


img

July 28, 2011

Cadalyst_Mag imgimg
Dell Precision certified Workstations are optimized for #Solidworks. Check out our latest workstations: http://t.co/YylUTNW #DellCAD

DellRonnie


img

July 28, 2011

DellRonnie imgimg
@solidsmack I run SWX alongside all my other apps – but then again, I am a PDM guy… #DellCAD

jonathanpscott


img

July 28, 2011

jonathanpscott imgimg
RT @Cadalyst_Mag: #DellCAD If you missed Josh’s blog on #CADspeed: Optimize #SolidWorks & be a happier user – http://t.co/BJ1A8MC

DellSMBnews


img

July 28, 2011

DellSMBnews imgimg
Have you checked out the CADspeed blog yet https://cadspeed.wordpress.com #dellcad

Kylee_Dell


img

July 28, 2011

Kylee_Dell imgimg
@jonathanpscott #Dellcad ssd impr. file loading a lot. Not much to gain on modeling or sim performance though. The CPU still needs to chew

tonyisme


img

July 28, 2011

tonyisme imgimg
RT @jonathanpscott: #DellCAD Anybody using Solid State Drives to help their #SolidWorks performance? Made a huge difference on my laptop!

DellSMBnews


img

July 28, 2011

DellSMBnews imgimg
@jonathanpscott exactly! you are running SolidWorks (btw me too), but actually not using it (lol) @solidsmack #dellcad

olegshilovitsky


img

July 28, 2011

olegshilovitsky imgimg
@olegshilovitsky #DellCAD Oleg – you are right about that! LOL I rarely model much more than a plate. 🙂

jonathanpscott


img

July 28, 2011

jonathanpscott imgimg
@Cadalyst_Mag @jonathanpscott @solidsmack I’m using SSD. Not only for Solidworks. It helps a lot for performance. #dellcad

olegshilovitsky


img

July 28, 2011

olegshilovitsky imgimg
@cadcompany : Questions about CAD hardware configurations? Ask a #Dell expert – @DellRonnie – on #DellCAD

PattyGroenland


img

July 28, 2011

PattyGroenland imgimg
Follow a workstation guru > RT @DellRonnie: Dell Precision certified Workstations are optimized for #Solidworks. dell.com/precision #DellCAD

DellSMBnews


img

July 28, 2011

DellSMBnews imgimg
RT @olegshilovitsky: @Cadalyst_Mag @jonathanpscott @solidsmack I’m using SSD. Not only for Solidworks. It helps a lot for performance. #dellcad

DellSMBnews


img

July 28, 2011

DellSMBnews imgimg
SSD and SATA combination environment is a good way to optimize speed and storage. SSD’s getting cheaper. @tonyisme @jonathanpscott #DellCAD

SolidSmack


img

July 28, 2011

SolidSmack imgimg
@DellRonnie: Any advice on switching to SSD? #DellCAD

Cadalyst_Mag


img

July 28, 2011

Cadalyst_Mag imgimg
RT @SolidSmack: SSD and SATA combination environment is a good way to optimize speed and storage. SSD’s getting cheaper. @tonyisme @jonathanpscott #DellCAD

DellSMBnews


img

July 28, 2011

DellSMBnews imgimg
RT @Kylee_Dell: Have you checked out the CADspeed blog yet https://cadspeed.wordpress.com #dellcad

LaurenatDell


img

July 28, 2011

LaurenatDell imgimg
#DellCAD Not all SSDs are created equally – remember to check the specs. Its like the difference between 4200 RPM drives and 10k RPM drives.

jonathanpscott


img

July 28, 2011

jonathanpscott imgimg
@SolidSmack @jonathanpscott #Dellcad SSD for system disk & SATA for storage/simulation dumping ground <- would be my ideal combo

tonyisme


img

July 28, 2011

tonyisme imgimg
@tonyisme Sounds like a good combo. #DellCAD @DellRonnie – are there Precisions that have multiple HDD config options?

jonathanpscott


img

July 28, 2011

jonathanpscott imgimg
RT @jonathanpscott: #DellCAD Not all SSDs are created equally – check the specs. Its like the diff between 4200 RPM and 10k RPM drives.

SolidSmack


img

July 28, 2011

SolidSmack imgimg
RT @jonathanpscott: #DellCAD Anybody using Solid State Drives to help their #SolidWorks performance? Made a huge difference on my laptop!

Lanett78


img

July 28, 2011

Lanett78 imgimg
In case any #DellCAD tweeters need a new workstation quick, 17’’ Precision M6600 w/LCD touch screen now Ships Fast http://del.ly/6014Rztk

DellSMBnews


img

July 28, 2011

DellSMBnews imgimg
@jonathanpscott @tonyisme Yes! All of our Precision workstations support multiple HDD configs with RAID options #DellCAD

DellRonnie


img

July 28, 2011

DellRonnie imgimg
This #DellCAD TwitterChat is sponsored by #Dell. Thanks to @DellSMBNews for their support!

Cadalyst_Mag


img

July 28, 2011

Cadalyst_Mag imgimg
@SolidSmack: Is anyone using #SolidWorks RealView? Not often – hurts my eyes when doing detail work #DellCAD

cambridgedesign


img

July 28, 2011

cambridgedesign imgimg
Thanks also to @AMD_Unprocessed for its support for #DellCAD TwitterChat and the #CADspeed blog.

Cadalyst_Mag


img

July 28, 2011

Cadalyst_Mag imgimg
Special thanks to one of our favorite bloggers, Josh Mings @SolidSmack for a great #DellCAD TwitterChat.

Cadalyst_Mag


img

July 28, 2011

Cadalyst_Mag imgimg
#DellCAD: @solidworks Thanks to the #SolidWorks team for their support!

Cadalyst_Mag


img

July 28, 2011

Cadalyst_Mag imgimg
@DellSMBnews you need to remove the insanely annoying floating “wanna chat” box. Seriously #Dellcad #offtopic

tonyisme


img

July 28, 2011

tonyisme imgimg
A full transcript will be available after the TwitterChat. Watch for #DellCAD or follow @Cadalyst_Mag for the link.

Cadalyst_Mag


img

July 28, 2011

Cadalyst_Mag imgimg
@Cadalyst_Mag – you’re very welcome. And thanks to you, @SolidSmack and everyone else who joined us for #DellCAD today!

DellSMBnews


img

July 28, 2011

DellSMBnews imgimg
The #DellCAD TwitterChat is officially closed. Please feel free to keep chatting amongst yourselves. Thanks to all for participating!

Cadalyst_Mag


img

July 28, 2011

Cadalyst_Mag imgimg
RT @Cadalyst_Mag: A full transcript will be available after the TwitterChat. Watch for #DellCAD or follow @Cadalyst_Mag for the link.

olegshilovitsky


img

July 28, 2011

olegshilovitsky imgimg
#DellCAD Thanks, Josh (@SolidSmack). Good TwitterChat.

jonathanpscott


img

July 28, 2011

jonathanpscott imgimg
@Cadalyst_Mag great initiative! #Dellcad

tonyisme


img

July 28, 2011

tonyisme imgimg
learned about tweet chat made by #dellcad and @solidsmack. maybe we need to have one about #PLM?

olegshilovitsky


img

July 28, 2011

olegshilovitsky imgimg
Also, check out the #SolidWorks performance article here on the CADSpeed blog http://bit.ly/papOs0 #DellCAD

SolidSmack


img

July 28, 2011

SolidSmack imgimg
Thanks @solidsmack @cadalyst_mag @DellSMBNews for a nice TwitterChat today #DellCAD

razorleaf


img

July 28, 2011

razorleaf imgimg
While today’s #DellCAD tweetchat has officially ended the conversation doesn’t have to stop! Continue to use the hashtag, follow @DellRonnie

DellSMBnews


img

July 28, 2011

DellSMBnews imgimg
RT @SolidSmack: Also, check out the #SolidWorks performance article here on the CADSpeed blog http://bit.ly/papOs0 #DellCAD

JohnEvansDesign


img

July 28, 2011

JohnEvansDesign imgimg
Also > RT @SolidSmack: […] wondering about SolidWorks/Workstation performance email josh@solidsmack.com or stop by solidsmack.com #DellCAD

DellSMBnews


img

July 28, 2011

DellSMBnews imgimg
And > RT @Cadalyst_Mag: A full transcript will be available after the TwitterChat. Watch for #DellCAD or follow @Cadalyst_Mag for the link.

DellSMBnews


img

July 28, 2011

DellSMBnews imgimg
@razorleaf – you’re very welcome! thank you for joining #DellCAD ~LPT

DellSMBnews


img

July 28, 2011

DellSMBnews imgimg
RT @DellSMBnews: In case any #DellCAD tweeters need a new workstation quick, 17’’ Precision M6600 w/LCD touch screen now Ships Fast http://del.ly/6014Rztk

DellChannel


img

July 28, 2011

DellChannel imgimg
RT @DellSMBnews: In case any #DellCAD tweeters need a new workstation quick, 17’’ Precision M6600 w/LCD touch screen now Ships Fast http://del.ly/6014Rztk

adaptivecorp


img

July 28, 2011

adaptivecorp imgimg
RT @DellEnterprise: Live Twitter chat on CAD starting now! See #DellCAD to join in the conversation.

mandheer


img

July 28, 2011

mandheer imgimg

powered by Storify

Four Practical Approaches to Improving SolidWorks Performance

July 27, 2011 4 comments

SolidWorksWhat goes into improving SolidWorks performance? Way too much. Really, programs, CAD software should be more simple. Hardware should be more simple, but for the very reason that software and hardware are not developed together, we’re faced with attempting to optimize both and you… are faced with this article.

You can break all the aspects of performance and what goes into optimizing your system into four practical approaches. You can apply these to a large company, small company or an individual. You can use it as a checklist or give it to IT and tell them to get their act together.

Software Performance

SolidWorks is a strange beast. You’ll get optimal performance one time and then something changes to totally confuse you. How you create your model — keeping files together, reducing external references, optimizing relations — helps. These are all things that a bit of training and a solid slap can solve. Beyond that, you can improve performance by going into the SolidWorks options and turning off the SolidWorks news feed, reducing level of detail and setting the search to index only when idle. RealView adds more realistic visuals for material and environments. If you notice lag, try toggling it off under View / Display / RealView. All good things to know, but none of this will matter as much if you have optimized hardware.

Hardware Performance

For best performance with SolidWorks, it’s always best to start with hardware. You’ll find better performance with SolidWorks with a faster CPU. Max that sucker out. Multiple CPUs, even better. Recommended RAM for current SolidWorks versions is 6GB. It’s cheap, toss it in. A 1GB graphics card will provide smoother visuals. Turn off visual effects for Windows. Go to Performance Info and Tools in the Windows Control Panel and adjust for best performance. Keep your computer clean. Use programs like Speccy to monitor your system, Defraggler to keep your system defragged and CCleaner to keep that registry and program list optimized.

Software Life Cycle

Keeping software updated can be challenging, particularly when new versions of software that are used together come out at different times throughout the year. For best performance increases and time to allow testing of new functionality, I suggest a 14-18 month update cycle. This allows for at least one Service Pack (point release) of SolidWorks and provides time for a soft roll-out of the update.

Hardware Life Cycle

I list this last because it’s often the coldest piece of cod to swallow. Hardware is expensive. But, that doesn’t mean you shouldn’t prepare for the necessary upgrades that you will need over the years, especially in light of SolidWorks software updates and the need to keep employees or yourself super efficient. 2-year hardware cycles are often ideal for three reasons. It keeps you apprised of the technology, improves power efficiencies/capabilities and you get a better tax break for donating the old stuff to charity.

We view performance as software that doesn’t crash and hardware that doesn’t make us wait around. There’s always something you can do to make it all run a little better. The bottom line is this: Keep on a clear update cycle for software and hardware. Deal with hardware performance first, maxing out CPU speed, then deal with the intricacies of the software itself. You’ll have a smoother running system and you’ll be a much happier SolidWorks user.

Join Josh Mings for a TwitterChat on Thursday, July 28 at 4 p.m. ET. We’ll be talking about performance on SolidWorks. Follow the conversation at #dellcad and jump in!  Click for more information.

Josh Mings is a mechanical engineer in the aircraft interiors industry. He is a CSWP with certified training and support for SolidWorks. He is editor of SolidSmack.com covering CAD, design and technology and is co-host of Engineer vs. Designer at evd1.tv. Follow him on Twitter@joshmings and @solidsmack or find him at LinkedIn or Google+.

A CAD Manager’s Guide to Hardware Upgrades, Part 2

June 21, 2011 5 comments

The first post in this series discussed upgrade procedures under various organizational structures. Now, we dive into prioritizing upgrades. One thing is certain: as long as CAD software increases in power there will always be a need for upgrading and replacing CAD workstations.

Hardware Upgrades for CAD ManagersUpgrades Based on Workload

While some companies have a policy of replacing all of the CAD workstations simultaneously, others provide workstations based on workload. “Typically I have prioritized computer upgrades in offices in a method similar to a nurse’s triage at a hospital,” Chris Currie wrote in the Cadalyst LinkedIn group.

Currie’s practice is certainly not unusual in the CAD world. With any one office participating in several disciplines or practices, it is very common for users in the same office or department to have differing needs. That is to say that the entry level CAD professional may not be doing the more complex, intense work of a senior employee.

Reusing Hardware Based on Functionality

Often companies seek cost savings in the area of hardware by moving workstations down. Drafters performing complex work may receive new workstations while more junior drafters receive the workstation being replaced. In effect, everyone gets a “newer,” more powerful workstation while providing a cost savings to the company.

Standardizing the Process

CAD software becoming increasingly powerful each year and the need for upgraded hardware does not look to end any time soon. It would help any CAD manager to standardize the process for upgrades to make the process less difficult. Take the lessons learned from this year’s hardware upgrade and document them to help you during future upgrades.

Whether your hardware upgrade procedure is well defined or a haphazard per event trial, leave us a comment below and tell us about it. CADspeed would love to hear from you whatever your process for requesting and providing new hardware may be.

Author: Curt Moreno