Recommended Hardware for CAD, Part 1: AutoCAD, Inventor, Revit and Other Autodesk Applications
Here at CADspeed, we get a lot of questions about buying new hardware for CAD applications. While the answer to, “What CAD hardware should I buy?” varies widely based on the person asking the question, it always starts in the same place: with the requirements of the CAD software you plan to use.
Yet a list of minimum requirements can be, well, only minimally helpful in the quest for the right CAD workstation. Most CAD users need hardware that will not just meet the minimum specifications, but enable them to maximize their productivity.
CAD software developers know this, and they have a vested interest in making sure you get the bang for your software buck. So this series will explore recommended hardware for a variety of common CAD applications from the makers of the applications themselves.
We start this series with Autodesk, creator of 3D design, engineering and entertainment software that includes some of the most commonly used applications in the industry. Autodesk has developed a web site to help users find certified or recommended software for Autodesk applications.
The truth is, however, many CAD users don’t use just one CAD software application. It’s very common to use both AutoCAD and Revit on the same system, for example. The intriguing part of the Autodesk hardware site is you can select multiple products and find the common driver and hardware configurations that will work best for your system.
Certified vs. Recommended
On the Autodesk website, you’ll see two terms that you need to understand: certified and recommended. “Certified” hardware meets Autodesk’s minimum hardware requirements for the applicable Autodesk software product. At least one configuration (e.g., GPU + driver, or CPU + GPU + RAM + HD + BIOS) has passed tests designed to verify that the hardware supports the product’s features.
“Recommended” hardware meets Autodesk’s recommended system requirements for the applicable Autodesk product. At least one configuration has passed tests designed to verify that the hardware supports the product’s features.
A “Recommended” or “Certified” rating is based on the test results for a graphics card and driver or a complete system. Clicking the link for a card or system will reveal the results of each individual component tests.
|Recommended – Meets Autodesk’s recommended system requirements and has passed all Autodesk certification tests.|
|Certified – Meets Autodesk’s minimum system requirements and has passed all Autodesk certification tests.|
|Icon||Component Test Results*|
|Passed – When tested with this configuration, the hardware passed testing.|
|Passed with issues – When tested with this configuration, the hardware has some minor problems or features that are not supported.|
|Failed – When tested with this configuration, the hardware does not adequately support the product’s features.|
|No Results – This configuration has not been tested by the associated product.|
* Test results are valid only for the tested combination of hardware and driver. Certified or Recommended status does not guarantee that the graphics hardware will operate acceptably with other drivers or configurations. Driver-specific test results are available for some hardware and can be found by clicking on a product name in the Hardware List.
Other Terms to Understand
Before using the Autodesk Certified Hardware site, you should understand a few other common terms to make sure you are getting the right results.
- Workstation—Graphics hardware designated by the manufacturer as workstation-grade, typically meaning it is designed to work with 3D CAD applications
- Consumer—Graphics hardware designated by the manufacturer for desktop or gaming level use, typically meaning it is not designed or recommended for use with 3D CAD applications
- Mobile—Integrated hardware normally found in laptops.
- Workstation Desktop—Desktop system designated by the manufacturer as workstation-grade, typically meaning it is designed to work with 3D CAD applications
- Workstation Laptop—Laptop designated by the manufacturer as workstation-grade, typically meaning it is designed to work with 3D CAD applications
- Consumer Desktop—Desktop system designated by the manufacturer for desktop or gaming level use, typically meaning it is not designed or recommended for use with 3D CAD applications
- Consumer Laptop—Laptop designated by the manufacturer for desktop or gaming level use, typically meaning it is not designed or recommended for use with 3D CAD applications.
- Tablet—Touch-screen device with integrated components.
The Hardware List page contains only the hardware products that Autodesk has tested for use with certain Autodesk applications. Autodesk tests a variety of hardware, but focuses primarily on hardware the manufacturer has indicated is workstation-grade and designed to work with 3D CAD applications.
Unless otherwise noted, Autodesk hardware certification tests are run on systems containing a single video card with a single monitor attached. Autodesk does not currently run certification tests on systems with multiple graphics cards installed or multiple monitors.
Author: CADspeed Editors